What Type of Lamp Should I Use for My Recessed Lighting?

Light bulbs a.k.a. lamps are a very important factor in a recessed lighting layout plan.   Different light bulbs affect different light levels, color and recessed fixture spacing, which in turn could result in different moods.  In the end choosing the lamp is just as important as choosing the right recessed light fixture. 

Here are a few questions you should ask your self at this level of your recessed lighting layout.

• Do you want the room to feel warm and cozy?  Or Bright and efficient?
• Will the space in your project be for performing tasks, or will it be a relaxed space just needing light to walk through safely?
• Do you have artwork, statues or entry ways that need special lighting techniques to enphasize their presents.

Different Types of Light Bulbs and their Effects

NOTE: Lamp size is calculated by the number of 1/8 inch units across the widest part of the glass casing.  Example - A21 = 21 one-eighth-inch units across, which is (2-5/8" across)

Incandescent A-Lamps

• These lamps create a warm amber light with a good color rendition.  Light shines in all directions with this light bulb so this light should be used for general, ambient or wallwashing applications.  A-Lamps work best with a reflector in the recessed trim.  A-Lamps can be used with a light dimmer to create a softer light.  Low bulb cost - .99 to $ 1.39
• Sizes = A15, A17, A19 (most Common) and A21
• Lamp Life = 750 to 1250 hours
• The A-Lamp is available in compact fluorescent energy saving lamps starting at $ 5.99 and has a lamp life of 7000 hours.  (compact fluorescent lamps can not be used with a light dimmer)

Incandescent BR and R lamps

• BR and R lamps create a warm amber light with a good color rendition.  A reflector is built-in to the lamp that directs light where needed.   BR and R lamps should be used for general, ambient, task, accent, grazing or wallwashing applications.  BR and R lamps can be used with a light dimmer to create a softer light.  Low bulb cost - $ 1.39 to $ 2.39
• Sizes = R20, BR30 and BR40
• Lamp Life = 1500 to 2000 hours
• The R and BR lamps are available in compact fluorescent energy saving lamps starting at $ 6.39 and have a lamp life of 7000 hours.  (compact fluorescent lamps can not be used with a light dimmer)

Halogen PAR lamps

• PAR lamps create a bright white light with true color rendition.  A reflector is built-in to the lamp for very good light beam control.   Halogen PAR lamps should be used for general, ambient, task, accent, grazing or wallwashing applications.  Halogen PAR lamps can be used with a light dimmer to create a softer light.  High bulb cost - $ 4.39 to $ 8.39
• Sizes = PAR16, PAR20, PAR30 and PAR38
• Lamp Life = 3000 to 4000 hours

Low-Voltage Halogen lamps

• These lamps create a bright white light with true color rendition.  A reflector is built-in to the lamp for very good light beam control.  Low-Voltage lamps have the best control of light output.  Low-Voltage lamps require a step down transformer from 120volts to 12 volts.  Low-Voltage lamps should be used for task, accent, grazing or wallwashing applications.  Low-Voltage lamps can be used special low-voltage light dimmers to create a softer light.  High bulb cost - $ 4.39 to $ 8.39 (fixture cost is usually a little more expensive as well)
• Sizes = MR16, AR11 and PAR36
• Lamp Life = 3000 to 4000 hours
• Low-Voltage Bi-pin halogen bulbs are available in LED energy saving lamps starting at $ 36.39 and have a lamp life of 40,000 hours.  

Compact Fluorescent Lamps (CFL)

• CFLs consume up to 75% less energy than incandescent and halogen lamps.  CFLs create a cool white light with a low color rendition although, technologies on CFLs are improving to provide softer light and better color rendition.  Light shines in all directions with this light bulb so this light should be used for general, ambient or wallwashing applications unless you use the R type CFLs that include a built-in reflector.  CFLs work best with a reflector in the recessed trim.  High bulb cost - $ 3.99 to $ 8.39
•  
• Styles = 2-pin, 4-pin, candelabra base and medium base
• Lamp Life = 7000 hours

Suggested Light Levels for Various Applications

General or Ambient Recessed Lighting Layout

Should use low to medium light levels (5 to 20 foot candles).  We Suggest using these lamps:

• A-Lamps or BR30 lamps for ceilings 10' or lower
• BR40, PAR30 or PAR38 for ceilings 10' or higher
• Medium based R type CFLs (can not be used with a light dimmer)

With an 8 foot ceiling, space fixtures 3 feet from the walls and 6 to 7 feet apart in a balanced pattern.   With a 9 foot ceiling, space fixtures 3.5 feet from the walls and 7 to 8 feet apart in a balanced pattern.

My past post on lighting design software can assist you with a computer generated recessed lighting layout. 

Task Recessed Lighting Layout

Should use medium to high light levels (35 to 55 foot candles).  We Suggest using these lamps:

• PAR30 lamps for ceilings 10' or lower
• PAR38 for ceilings 10' or higher

With an 8 foot ceiling, space fixtures 3 feet apart, with a 10 foot ceiling, space fixtures 4 feet apart positioned over the edge of the work space to avoid shadowing. 

Accent Recessed Lighting Layout

Should 4 to 5 times more intense than the general or ambient light levels (60 to 100 foot candles).  We Suggest using these lamps:

• PAR30 or MR16 lamps for ceilings 10' or lower
• PAR38 or PAR36 for ceilings 10' or higher

With an 8 foot ceiling, space fixtures 18 - 24" from wall, with a 10 foot ceiling, space fixtures 30 - 36" from wall.   Light framed art and photos at a 30 degree angle from the suggested distance from the wall.  When lighting a free standing object use two lights from each side for a more dramatic appearance. 

 Wallwashing Recessed Lighting Layout

Should provide an even light level across wall with evenly spaced fixtures (35 to 55 foot candles).  We Suggest using these lamps:

• A19 lamps or Compact Fluorescent Lamps

Space fixtures 3 feet from the wall and 3 feet apart for even light distribution.  Washing a wall gives you the feeling of a larger room.

Grazing Recessed Lighting Layout

Should emphasize wall textures with a shadowed appearance (20 to 25 foot candles).  We Suggest using these lamps:

• BR30, PAR30 or CFL

Space fixtures 6 - 9" from the wall and 12 - 18" apart for even light distribution.  Grazing a brick, stone or heavy textured wall gives a deep shadow and light effect that will run down the vertical length of the wall.

These suggestions should assist you in understanding which light bulb you will want to use for your recessed lighting layout and you should know what type of light function you will want your recessed lighting to perform:  General, Task, Accent, Wallwash or Grazing

 All lighting function images and some research has been provided by American Lighting Association

Lutron Introduces the Skylark eco-dim Control

Lighting and ceiling fan manufactures are becoming more and more concerned with the future of the Earth through energy savings by manufacturing products that reduce energy consumption and reduce waste.  Of course they understand that they are tapping into a new energy conscious market of consumers as well.  Introducing money saving products sells, I would say. 

Lutron Electronics has introduced incandescent light dimming controls that when in eco mode saves 15% energy and extends lamp life four times as compared to a standard switch.

Lutron Introduces the Skylark Eco-Dim Light Dimming Control

The Skylark eco-dim by Lutron Electronics ships to you already in eco mode ready to save 15% energy as soon as it is installed.  Installation usually does not take more than 15 minutes.  Lutron only offers two eco-dim controls the Skylark single pole white wall and the Skylark 3-way white wall light dimmer.

The Sklylark Eco-Dim has the following features:

• When in eco-dim mode saves 15% energy and extends lamp life four times as compared to a standard light switch.
• Finger slider moves up to brighten the light and down to dim light
• The 3-way model can be used with a standard 3-way switch to control one light source from two locations.
• Has a normal setting to work as a standard dimmer to access full light intensity